Dolly Varden Silver (DV.V): Intersects 45.82 Meters Averaging 304 g/t Silver at Torbrit Deposit; Expands and Upgrades Mineralization

Just FYI I published a piece that outlines my case for Dolly Varden Silver today which can be read HERE.

Vancouver, BC – February 16, 2021 – Dolly Varden Silver Corporation (“Dolly Varden” or the “Company”) (TSXV:DV) (OTC:DOLLF), is pleased to announce the results of the remaining assays from the 2020 drill program from it’s 100% owned Property located near tidewater in northwest British Columbia. The work completed during the 2020 Exploration Program included infill and step-out drilling at Torbrit Deposit as well as regional mapping, surface sampling and exploration drilling.

The high-grade silver deposit at Torbrit hosts the largest 43-101 Mineral Resource of the three silver deposits at the Dolly Varden Silver Project. Torbrit continues to show its potential as the most significant silver deposit on the Property and is considered among the most advanced pure silver assets in Canada, with further room for expansion at depth and along strike. The historic workings from the Torbrit mines past production support underground access to silver mineralization and surface infrastructure provides direct road access to deep tidewater docks at Alice Arm, BC.  Highlights from the recent drilling program include:

• DV20-222: 310 g/t silver over 6.00 meters, including 1,083 g/t silver over 2.70 meters
• DV20-244: 304 g/t silver over 45.82 meters, including 642 g/t silver over 4.00 meters
• DV20-246: 306 g/t silver over 5.10 meters, including 1,290 g/t silver over 0.60 meter

The true width of intercepts is estimated to be 80-95% of the Core Length (m) reported using the current understanding of the three-dimensional nature of the mineralization and grade models at Torbrit. Interval lengths are constrained by grade values within the mineralization envelope. Recoveries on the individual metals have not been applied to composite calculations which are reported at 100%.

“We are seeing consistent intervals of high-grade silver mineralization at the Torbrit Silver deposit that has the potential to support economically attractive underground bulk-mining technics, while at the same time each successive drill programs continues to demonstrate that the deposit is open for expansion.  As part of our 2021 work plan, we are considering further underground work at Torbrit to develop better access for test mining and bulk sampling, as well as resource expansion and exploration drilling at depth and along strike to the east of Torbrit.  While silver exploration is our primary focus on the Property, we are highly encouraged with the geological and pathfinder element geochemical results for gold and copper mineralization from the four-kilometer long early-Jurassic volcanic and intrusive trend located northwest of our growing silver deposits. Therefore, we can not rule out a gold discovery consistent with the plus million-ounce resource at the adjacent Homestake property in addition to the potential for another Torbrit like silver discovery,” said Shawn Khunkhun, President and CEO of Dolly Varden Silver. 

A total of 11,397 meters in 40 drill holes were completed during the 2020 exploration program at Dolly Varden. 19 holes were completed in the Torbrit area and 21 reconnaissance and exploration drill holes were drilled, testing multiple areas on the Property.

Figure 1. Logging Extensive epithermal silver vein and breccia mineralization in Drill Hole DV20-222

Figure 2 or another figure Epithermal Silver Vein and Breccia Mineralization at Torbrit DV20-244

This release represents the results from continued exploration within the Torbrit Silver Mine Area (initial results released October 07, 2020), with a focus of step-out drilling and infilling areas of sparse data.  Additionally, exploration drilling to test structures and stratigraphy prospective for silver mineralization along the 4.5km long volcanogenic-related stratigraphy that hosts the Torbrit Silver deposit. Initial exploration and reconnaissance drilling was also completed on the western portion of the property where strongly quartz-sericite-pyrite altered early-Jurassic volcanic and intrusive rocks with associated gold and pathfinder element anomalies in soil geochemistry occur in a similar setting to well-known deposits and mines located further north in the Golden Triangle. 

Planning for the 2021 Dolly Varden exploration program is underway, utilizing the geological data from the past year’s program.

Torbrit Resource Area

The 45.82 thick intercept in drill hole DV20-246 expanded mineralization vertically from the current Mineral Resource model at the Torbrit.  Based on historic underground drilling, mineralization is interpreted to be a contiguous, broad package of exhalative with epithermal overprint veins and breccias at the deposit These areas of mineralization are situated above historic underground infrastructure.

DV20-246 was an infill hole drilled from the same pad as DV20-244 to test the eastern extent of the internal high-grade zone and confirmed modelled mineralization proximal to historic workings.

Drill hole DV20-222 was a 35m step out to the west of the nearest drill hole, with subsequent infill hole DV20-244 drilled 15m to the east of it. The intercept in DV20-222 aligns with the extrapolated block model but demonstrates an increase in the composite silver grade over the interval.

Three holes (DV20-235, 238 and 240) drilled at the Wolf deposit, included in the Current Mineral Resource; drilling tested potential extensions 150 meters north and further down-dip of the structures that host epithermal-style silver mineralization. Silver-bearing structures were suggesting that the system remains open for expansion.

Table 1 Composite Silver, Lead and Zinc Results from Drill Core

The true width of intercepts is estimated to be 80-95% of the Core Length (m) reported using the current understanding of the three-dimensional nature of the mineralization and grade models at Torbrit. Interval lengths are constrained by grade values within the mineralization envelope. Recoveries on the individual metals have not been applied to composite calculations which are reported at 100%.

Exploration Drilling 2020

All drilling during 2020 was completed using oriented drill core techniques, for use in an ongoing structural re-interpretation of the entire Project. Drill holes testing structures within the 4.5 kilometer-long horizon that hosts potassium alteration, trending north from the Torbrit deposit, will provide valuable geological information in the exploration for additional volcanogenic-related depositional basins as well as associated structurally controlled epithermal silver-bearing veins and breccias.

Drill hole DV20-245 tested the Chance structure approximately 450 meters west of the 2019 drilling and intercepted the target structure.  Subsequent drilling will vector towards higher-grade and wider shoots in this area.

Reconnaissance Drilling on Western Gold Belt

Initial reconnaissance drilling was completed in the western “Gold Belt”; this area is typified by a separate north-northwest trend, separate to the area that hosts the main silver deposits and past-producing mines on the Property.  This area is typified by a strong QSP (quart-sericite-pyrite) alteration trend that projects north towards Fury Gold’s Homestake Ridge Deposit.  Dolly Varden is targeting a similar geological setting in early-Jurassic volcanic and intrusive rocks to other significant gold-silver and copper-gold deposits in the Golden Triangle.  Drilling encountered hydrothermal breccias and quartz stockwork veining and strong pyrite with pathfinder elements such as bismuth, copper, lead and zinc, as well as anomalous gold (up to 0.1 g/t Au).  The polymetallic quartz-carbonate structures appear similar to those that host high-grade zones and shoots at the Big Missouri, Premier and Brucejack deposits located north of Dolly Varden.

At the 1.5 km long Starlight-Racehorse trend within the western gold belt, the alteration and quartz stock work in exploration drill holes DV20-226 and DV20-228 (850 m apart) returned 0.19 g/t Au with 0.62% Cu over 8.00m core length and 0.06 g/t Au with 1.36% Cu over a core length of 3.65m respectively. The company is encouraged by these results and is planning further work in the western Gold Belt alteration zone.

Torbrit Deposit

The main Torbrit deposit hosts stratiform exhalative-style silver mineralization within volcanic rocks that is overprinted by epithermal vein mineralization, with associated lead and zinc. Additional technical information on Torbrit including drilling plan map can be found at https://www.dollyvardensilver.com/

The locations of diamond drill holes reported in this release are shown in Table 2 below.  Full Exploration maps and drill hole locations are available on the company website.

CLICK HERE to read the full news release.